Silicom N6010

  • Card information:

    • Vendor: Silicom

    • Name: N6010

    • Ethernet ports: 2x QSFP

    • PCIe conectors: Edge connector

    • FPGA Card Website

  • FPGA specification:

    • FPGA part number: AGFB014R24A2E2V

    • Ethernet Hard IP: E-Tile (up to 100G Ethernet)

    • PCIe Hard IP: P-Tile (up to PCIe Gen4 x16)

NDK firmware support

  • Ethernet cores that are supported in the NDK firmware:
  • PCIe cores that are supported in the NDK firmware:

    • P-Tile in the PCIe Module

    • See the <NDK-FPGA_root_directory>/card/silicom/n6010/config/card_conf.tcl file for supported PCIe configurations.

  • Makefile targets for building the NDK firmware (valid for Minimal app, may vary for other apps):

    • Use make 100g2 command for firmware with 2x100GE (default).

    • Use make 25g8 command for firmware with 8x25GE.

    • Use make 10g8 command for firmware with 8x10GE.

  • Support for booting the NDK firmware using the nfb-boot tool:

    • YES, starting with the nfb-framework version 6.18.0.

Note

To build the NDK firmware for this card, you must have the Intel Quartus Prime Pro and PACSign tool installed, including a valid license.