Silicom N6010

• Card information:

  • Vendor: Silicom

  • Name: N6010

  • Ethernet ports: 2x QSFP

  • PCIe conectors: Edge connector

  • FPGA Card Website

• FPGA specification:

  • FPGA part number: AGFB014R24A2E2V

  • Ethernet Hard IP: E-Tile (up to 100G Ethernet)

  • PCIe Hard IP: P-Tile (up to PCIe Gen4 x16)

NDK firmware support

• Ethernet cores that are supported in the NDK firmware:

  • E-Tile in the Network Module

• PCIe cores that are supported in the NDK firmware:

  • P-Tile in the PCIe Module

• Makefile targets for building the NDK firmware (valid for NDK-APP-Minimal, may vary for other apps):

  • Use make 100g2 command for firmware with 2x100GE (default).

  • Use make 25g8 command for firmware with 8x25GE.

  • Use make 10g8 command for firmware with 8x10GE.

• Support for booting the NDK firmware using the nfb-boot tool:

  • YES, starting with the nfb-framework version 6.18.0.

Note

To build the NDK firmware for this card, you must have the Intel Quartus Prime Pro and PACSign tool installed, including a valid license.